VM # 250-2″L TYGER
The V.M. # 250 – 2″L TYGER Portable Ejector (eductor) is used on board tankers, oil rigs, and vessels of all types.
The portable ejector is used to remove liquids from tanks, sumps, pits, and cargo and ballast spaces. This small eductor allows access to inaccessible spaces. Suggested uses include:
1. Keeping tank bottoms dry during tank or hold washing operations
2. Pumping water out of holds during firefighting operations
3. Regular or emergency pumping of liquids from ballast, bilge or cargo spaces
4. Powered by water pressure or the same liquid as suction fluid
This model can be lowered directly into the liquid to be suctioned. Or a length of suction hose can be attached. This model is available with an optional non-return valve and optional strainer. It can be furnished with hose barb couplings. BSP or NPT or JIS threads, Storz adapters or cam-lock quick coupling. The TYGER Ejector kit is complete with inlet, suction and discharge hoses and couplings.
TYGER Portable Ejector Kit – includes the following
» 1 pc V.M. # 250-2”L Bronze Ejector with Monel Nozzle
» 1 pc INLET HOSE – Fire “Motive Pressure” Hose, 23M ( 75’) x 1½” with brass (NH) couplings for ejector inlet
» 1 pc SUCTION HOSE – Non-Collapsible PVC Full Vacuum Hose, 6 M (20′) x 1¼” with brass coupling for ejector suction.
» 1 pc DISCHARGE HOSE – Mill-Type water discharge hose, Lay Flat type 23 M (75’) x 2” with Brass coupling for ejector discharge
» 1 pc V.M. SPARE BRONZE NOZZLE
|
Flow Data
|
|||||
|
Suction Capacity
|
Suction Lift
|
Discharge Head
|
Motive Pressure
|
Motive Flow
|
|
| Up to 100 GPM | Up to -20 Feet | Up to 110 Feet | 50 -150 PSI | 80 – 220 GPM | |
| Up to 23 M3/H | Up to -6 Meters | Up to 33 Meters | 3.5 – 10.5 Bar | 18 – 50 M3/H |
|
Materials of Construction
|
|||
|
Item
|
Standard
|
Optional Materials
|
|
| Body & Diffuser | Bronze | Stainless Steel, Ni-Alum, Aluminum | |
| Nozzle | Monel | 316 Stainless Steel | |
| Non-Return Valve | – | Bronze, 316 Stainless Steel | |
| Strainer | – | Bronze, 316 Stainless Steel |
|
Connections
|
|||
|
Description
|
Standard Eductor
|
Optional connections
|
|
| Inlet | 1½” NPT Female Thread | BSP threads, Hose barb, cam-lock | |
| Suction | 2” NPT Female Thread | BSP threads, Hose barb, cam-lock | |
| Discharge | 2” NPT Male Thread | BSP threads, Hose barb, cam-lock |