VM Stripping Ejectors

Permanently installed ejectors are used to strip ballast, bilge, cargo or other spaces that regularly have to be pumped out. The VM 1802 Series are high suction volume jet pumps. Applications include stripping and gas freeing Cargo Tanks, Bilges, Spud Cans, main & secondary drainage, pumping cement and drilling mud.

These VM ejectors can be fitted with tungsten carbide throat linings for severe wear and to prevent erosion when pumping sand. Standard construction uses a Bronze body with a monel nozzle. Some models are also available in 316 Stainless Steel and Carbon Steel. All VM Ejectors are customized to fit the requirements of each application.

stripping_ejector_1_350x145stripping_ejector_2_224x145

 

 

 

 

Model No.
1802-4
1802-4SP
1802-4LX
1802-6S
1802-6L
1802-6LX
Capacity M3/H 57 100 166 150 160 200
Inlet 2½” 2½” 2½” 4 4 4
Suction 4 4 4 6 6 6
Discharge 4 4 4 6 6 6
“A” 584 700 838 940 1079 1295
“B” 127 127 127 178 178 178
“C” 457 583 711 762 901 1117
“D” 140 140 140 178 133 178
Weight 32 41 50 86 113 140
Body Material Bronze Bronze Bronze
Stainless
Carbon Steel
Bronze Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Nozzle Material Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless

 

VM Stripping Ejectors for Bilge – Ballast – Cargo

stripping_ejector_1_350x145

 

 

 

 

Model No.
1802-8
1802-8X
1802-10
1802-10LX
1802-12
1802-14L
1802-18
Capacity M3/H 250 340 636 400 863 1135 1362
Inlet 6 6 8 6 10 10 12
Suction 8 8 8 8 10 10 14
Discharge 8 8^^ 10 10 12 14 18
“A” 1067 1384 1791 1559 2083 2611 2641
“B” 178 178 203 178 229 229 241
“C” 889 1206 1587 1381 1853 2382 2400
“D” 200 200 254 200 267 267 324
Weight 130 147 236 160 284 408 590
Body Material Bronze Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Bronze
Stainless
Carbon Steel
Nozzle Material Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless
Monel or
Stainless

 

Can be supplied with a 9″ or 10″ discharge

1802-8X

Typical Materials
» Body: Bronze, Carbon Steel, Stainless Steel
» Nozzle: Monel, 316 Stainless
» Wear Sleeve: Tungsten Carbide, 316 Stainless Steel

 

 

 

 

1802-10LX_320x240

Applications
» Cargo Oil Ejectors
» Ballast Water Ejectors
» Bilge Ejectors
» Drilling Mud Pumping
» Spud Can Drainage
» Main Drainage Pumping

 

 

1802-10L_320x126

Features
» Maintenance Free
» No moving parts
» Will not lose suction while motive fluid pressure is maintained.
» VM Ejectors are supplied to meet the requirements of each application.
» Available with removable wear lining for abrasive fluids.